SWITCH POWER SUPPLY

S-15 Series
low price and high reliability
105 output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effecticly
With short-circuit and owwerload protection
Compact size, light weight
100% full-load burning test
Installed with EMI filter, minimum wave
Item NO. /Specifications
S-15-5
S-15-12
S-15-24
DC output voltage
5V
12V
24V
Output voltage error(Note: 2)
2%
1%
1%
Rated output current
3A
1.3A
0.7A
Output current rage
0-3A
0-1.3A
0-0.7A
Wave and noise (Note: 3)
50mVp-p
100mVp-p
100mVp-p
Inlet stability (Note: 4)
0.5%
0.5%
0.5%
Load stability (Note: 5)
1%
0.5%
0.5%
DC output power
15W
15.6W
16.8W
Efficiency
65%
68%
72%
Adjustable range for DC voltage
+10,-5%
10%
10%
AC input voltage range
85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC
Input current
0.5A/115V 0.25A/230V
AC Inrush current
Cold-start current 15A/115V 30A/230V
Leakage current
< 0.5mA/240VAC
Overload proctection
105%~150% Type: Foldback: current limiting reset: auto recovery
Over-voltage protection
 
High-temperature protection
 
Temperature coefficient
0.02%/(0~50)
Setup rise hold up time
200ms, 100ms, 30ms
Vibration
10~500Hz, 2G 10min,/1 cycle, Period for 60min, Each axes
Withstand voltage
Input and output internal: 1.5KvAC, Input and enclosure: 1.5KvAC, Output and enclosure: 0.5KvAC
Isolation resistance
Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100M
Working temperature and hunmidity
-10~+60(Refer to output derating curve), 20%~90%RH
Store temperature and humidity
-20℃~+85℃, 10%~95%RH
Overall dimension
999735mm
Weight
0.3Kgs
Safety standards
Meet UL 1012 requirement (Not apply for the mark)
EMC standards
Meet FCC PART15J Conduction class B
 
Note:1. The testing condition for the paramenter above is: 230VAC input, rated load, 25 70% RH.Humidity.
2. Error.include the setting error,line stability and load stability.(Note:5)
3. Wave test: adopting"A12" double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage.
5. Load stability test: The load is from 0% to 100%.

Copyright © 2009 by Any Electronics Co.,Ltd. All Rights Reserved.
ADD:Ni'ao Industrial Area,Baishi Yueqing Zhejiang China
P.C.:325604 Tel:+86-577-62695889 Fax:+86-577-89736727
Email: fuyang.ke@timer-switch.com
          fuyang.ke@timer-relay.com
www.relay.com.cn www.anyabb.com www.timer-relay.com
www.timer-switch.com www.prc-oem.com ww.global-oem.com