Ultrasonic Sensor Waterproof UB1500 30GM U V1
Ultrasonic Sensor Waterproof UB1500 30GM U V1
Ultrasonic Sensor Waterproof UB1500 30GM U V1
External synchronization
The sensor can be synchronised by the external application of a square wave voltage. A synchronisation pulse at the synchronisation
input starts a measuring cycle. The pulse must have a duration greater than 100 μs. The measuring cycle starts with
the falling edge of a synchronisation pulse. A low level > 1 s or an open synchronisation input will result in the normal operation
of the sensor. A high level at the synchronisation input disables the sensor. Two operating modes are available:
1. Multiple sensors can be controlled by the same synchronisation signal. The sensors are synchronised.
2. The synchronisation pulses are sent cyclically to individual sensors. The sensors operate in multiplex mode.
Internal synchronization
The synchronisation connections of up to 5 sensors capable of internal synchronisation are connected to one another. When
power is applied, these sensors will operate in multiplex mode.
The response delay increases according to the number of sensors to be synchronised. Synchronisation cannot be performed
during TEACH-IN and vice versa. The sensors must be operated in an unsynchronised manner to teach the evaluation limits.
Note:
If the option for synchronisation is not used, the synchronisation input has to be connected to ground (0V) or the sensor has to
be operated via a V1 cable connector (4-pin).
Adjusting the evaluation limits
The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply
voltage -UB or +UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs
indicate whether the sensor has recognised the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught
with -UB, A2 with +UB.
Two different output functions can be set:
1. Analogue value increases with rising distance to object (rising ramp)
2. Analogue value falls with rising distance to object (falling ramp)
Evaluation limits may only be specified within the first 5 minutes after
Power on. To modify the evaluation limits later,
the user may specify the desired values only after a new Power On.
Download product details Including the size,Installation information and product functionality information
Downloads PDF Ultrasonic-Sensors-UB1500-30GM-U-V1:
Ultrasonic-Sensors-UB1500-30GM-U-V1(1129)
miniature ultrasonic sensor, low cost ultrasonic sensor, piezoelectric ultrasonic sensor, ping ultrasonic sensor, price of ultrasonic sensor, low power ultrasonic sensor
Ultrasonic Sensor Waterproof UB1500 30GM U V1
—————————————————————————————————————————————————-
We are searching for products agent and dealer. have our own factory. We have the ability of written software and die sinking of developing new products. More reliable products Large number using the MCU our products,We hope that you allow us to get a new product development,This will enable us to be more long-term cooperation,If you now or in future will purchase these products, please downloads PDF,We look forward to your mail,We will offer you the best products and service,we products include 24h Timer,Timer Relay,Digital Timer,Counter,Floatless Relay,Sockets,proximity switch,photoelectric switch,solid state relay,Switch power supply,Rev.preventing relay,Ultrasonic Sensor Waterproof UB1500 30GM U V1.
Shopping:
1. We can shipping all over the world by DHL , TNT ,UPS , FedEx and EMS . The packaging is very safe and strong. If you have any special needs please nitfy me.
2. If you choose the DHL.It will take around 1-3days to reach your shipment No.
If you choose the others,it will take around 3-5 days to reach your shipment No.
Warranty andamp;amp; Guarantee :
All components we sell the quality with 30 days Return policy from the day of shipment.
If you have any other questions please feel free to contact with me in any time.
SKYPE ID: anyrelay
